think nest will be best to orcastrate thigns

.vscode/extensions.json

@@ -0,0 +1,7 @@
+{
+    "recommendations": [
+        "paisleysoftworks.renpywarp",
+        "luquedaniel.languague-renpy",
+        "jnoortheen.nix-ide"
+    ]
+}

ansible/invintory.ini

@@ -0,0 +1,5 @@
+[soupclown1]
+root@187.77.193.76
+
+[pt1]
+dietpi@192.168.68.54

ansible/playbook.yaml

@@ -0,0 +1,27 @@
+---
+- hosts: pt1
+  become: yes
+  roles:
+    - dietpi
+  vars:
+    radios:
+      B407:
+        name: B407
+        serialpath: /dev/serial/by-id/usb-1a86_USB_Single_Serial_54FC052298-if00
+      5678:
+        name: 5678
+        serialpath: /dev/serial/by-id/usb-1a86_USB_Single_Serial_54F7017826-if00
+      D77E:
+        name: D77E
+        serialpath: /dev/serial/by-id/usb-1a86_USB_Single_Serial_54F7017033-if00
+      XXXX:
+        enabled: "no"
+        name: XXXX
+        serialpath: /dev/serial/by-id/usb-Silicon_Labs_CP2102_USB_to_UART_Bridge_Controller_0001-if00-port0
+        
+      # C123:
+      #   name: C123
+      #   serialpath: /dev/ttyACM1
+      #   frequency: 915000000
+      #   bandwidth: 125000
+      #   txpower: 14

ansible/roles/dietpi/tasks/main.yaml

@@ -0,0 +1,8 @@
+- name: Install pyenv
+  import_tasks: pyenv.yaml
+
+- name: Install Reticulum Network Stack (RNS)
+  import_tasks: rns.yaml
+
+- name: Install nomadnet (lxmf message daemon)
+  import_tasks: nomadnet.yaml

ansible/roles/dietpi/tasks/nomadnet.yaml

@@ -0,0 +1,28 @@
+---
+- name: Create systemd service for nomadnet
+  copy:
+    dest: /etc/systemd/system/nomadnet.service
+    content: |
+      [Unit]
+      Description=Nomadnet Daemon
+      After=multi-user.target
+
+      [Service]
+      Type=simple
+      Restart=always
+      RestartSec=3
+      User=root
+      ExecStart=nomadnet -d
+
+      [Install]
+      WantedBy=multi-user.target
+
+- name: Reload systemd
+  systemd:
+    daemon_reload: yes
+
+- name: Start nomadnet service after config update
+  systemd:
+    name: nomadnet.service
+    enabled: yes
+    state: started

ansible/roles/dietpi/tasks/pyenv.yaml

@@ -0,0 +1,59 @@
+- name: Install build environment
+  become: true
+  apt:
+    update_cache: true
+    cache_valid_time: 3600
+    pkg:
+      - git
+      - build-essential
+      - libssl-dev
+      - zlib1g-dev
+      - libbz2-dev
+      - libreadline-dev
+      - libsqlite3-dev
+      - curl
+      - libncursesw5-dev
+      - xz-utils
+      - tk-dev
+      - libxml2-dev
+      - libxmlsec1-dev
+      - libffi-dev
+      - liblzma-dev
+      - python3-pip
+      - python3-venv
+
+- name: Check if pyenv is installed
+  stat:
+    path: /root/.pyenv
+  register: pyenv_installed
+
+- name: Download pyenv install script
+  get_url:
+    url: https://pyenv.run
+    dest: /tmp/install_pyenv.sh
+    mode: 0755
+  when: not pyenv_installed.stat.exists
+
+- name: Run install script
+  shell: /tmp/install_pyenv.sh
+  when: not pyenv_installed.stat.exists
+
+- name: Add pyenv to .bashrc
+  blockinfile:
+    dest: "/home/dietpi/.bashrc"
+    block: |
+      export PYENV_ROOT="$HOME/.pyenv"
+      command -v pyenv >/dev/null || export PATH="$PYENV_ROOT/bin:$PATH"
+      eval "$(pyenv init -)"
+    marker: '# {mark} ANSIBLE MANAGED BLOCK - pyenv'
+    create: yes
+
+- name: Add pyenv to .profile
+  blockinfile:
+    dest: "/home/dietpi/.profile"
+    block: |
+      export PYENV_ROOT="$HOME/.pyenv"
+      command -v pyenv >/dev/null || export PATH="$PYENV_ROOT/bin:$PATH"
+      eval "$(pyenv init -)"
+    marker: '# {mark} ANSIBLE MANAGED BLOCK - pyenv'
+    create: yes

ansible/roles/dietpi/tasks/rns.yaml

@@ -0,0 +1,93 @@
+---
+- name: Install the rns package
+  ansible.builtin.pip:
+    name: rns
+    state: present
+    break_system_packages: yes
+
+- name: Install the lxmf package
+  ansible.builtin.pip:
+    name: lxmf
+    state: present
+    break_system_packages: yes
+
+- name: Install the nomadnet package
+  ansible.builtin.pip:
+    name: nomadnet
+    state: present
+    break_system_packages: yes
+
+- name: Create systemd service for rns
+  copy:
+    dest: /etc/systemd/system/rns.service
+    content: |
+      [Unit]
+      Description=Reticulum Network Stack Daemon
+      After=multi-user.target
+
+      [Service]
+      Type=simple
+      Restart=always
+      RestartSec=3
+      User=root
+      ExecStart=rnsd --service
+
+      [Install]
+      WantedBy=multi-user.target
+
+- name: Reload systemd
+  systemd:
+    daemon_reload: yes
+
+- name: Ensure rns service is configured
+  systemd:
+    name: rns.service
+    enabled: yes
+    state: stopped
+
+- name: Ensure Reticulum config directory exists
+  file:
+    path: /root/.reticulum
+    state: directory
+    mode: "0755"
+
+- name: Deploy rns configuration file (using block for friendly file updates)
+  copy:
+    dest: /root/.reticulum/config
+    content: |
+      [reticulum]
+        enable_transport = Yes
+        share_instance = Yes
+        instance_name = {{ansible_hostname}}
+        discover_interfaces = Yes
+        panic_on_interface_error = No
+        respond_to_probes = Yes
+
+      [logging]
+        loglevel = 6
+
+      [interfaces]
+
+        [[Default Interface]]
+          type = AutoInterface
+          enabled = Yes
+        {% for key, radio in radios.items() %}
+
+        [[RNode LoRa {{radio.name}}]]
+          type = RNodeInterface
+          enabled = {{ radio.enabled | default('yes') }}
+          port = {{ radio.serialpath | default('/dev/ttyACM0') }}
+          frequency = {{ radio.frequency | default(915000000) }}
+          bandwidth = {{ radio.bandwidth | default(125000) }}
+          txpower = {{ radio.txpower | default(7) }}
+          spreadingfactor = {{ radio.spreadingfactor | default(8) }}
+          codingrate = {{ radio.codingrate | default(5) }}
+          id_callsign = {{ radio.name | default(key) }}
+          id_interval = {{ radio.id_interval | default(600) }}
+        {% endfor %}
+
+- name: Start rns service after config update
+  systemd:
+    name: rns.service
+    enabled: yes
+    state: started

core/.gitignore

@@ -0,0 +1,56 @@
+# compiled output
+/dist
+/node_modules
+/build
+
+# Logs
+logs
+*.log
+npm-debug.log*
+pnpm-debug.log*
+yarn-debug.log*
+yarn-error.log*
+lerna-debug.log*
+
+# OS
+.DS_Store
+
+# Tests
+/coverage
+/.nyc_output
+
+# IDEs and editors
+/.idea
+.project
+.classpath
+.c9/
+*.launch
+.settings/
+*.sublime-workspace
+
+# IDE - VSCode
+.vscode/*
+!.vscode/settings.json
+!.vscode/tasks.json
+!.vscode/launch.json
+!.vscode/extensions.json
+
+# dotenv environment variable files
+.env
+.env.development.local
+.env.test.local
+.env.production.local
+.env.local
+
+# temp directory
+.temp
+.tmp
+
+# Runtime data
+pids
+*.pid
+*.seed
+*.pid.lock
+
+# Diagnostic reports (https://nodejs.org/api/report.html)
+report.[0-9]*.[0-9]*.[0-9]*.[0-9]*.json

core/.prettierrc

@@ -0,0 +1,4 @@
+{
+  "singleQuote": true,
+  "trailingComma": "all"
+}

core/eslint.config.mjs

@@ -0,0 +1,35 @@
+// @ts-check
+import eslint from '@eslint/js';
+import eslintPluginPrettierRecommended from 'eslint-plugin-prettier/recommended';
+import globals from 'globals';
+import tseslint from 'typescript-eslint';
+
+export default tseslint.config(
+  {
+    ignores: ['eslint.config.mjs'],
+  },
+  eslint.configs.recommended,
+  ...tseslint.configs.recommendedTypeChecked,
+  eslintPluginPrettierRecommended,
+  {
+    languageOptions: {
+      globals: {
+        ...globals.node,
+        ...globals.jest,
+      },
+      sourceType: 'commonjs',
+      parserOptions: {
+        projectService: true,
+        tsconfigRootDir: import.meta.dirname,
+      },
+    },
+  },
+  {
+    rules: {
+      '@typescript-eslint/no-explicit-any': 'off',
+      '@typescript-eslint/no-floating-promises': 'warn',
+      '@typescript-eslint/no-unsafe-argument': 'warn',
+      "prettier/prettier": ["error", { endOfLine: "auto" }],
+    },
+  },
+);

core/nest-cli.json

@@ -0,0 +1,8 @@
+{
+  "$schema": "https://json.schemastore.org/nest-cli",
+  "collection": "@nestjs/schematics",
+  "sourceRoot": "src",
+  "compilerOptions": {
+    "deleteOutDir": true
+  }
+}

core/package.json

@@ -0,0 +1,73 @@
+{
+  "name": "core",
+  "version": "0.0.1",
+  "description": "",
+  "author": "",
+  "private": true,
+  "license": "UNLICENSED",
+  "scripts": {
+    "build": "nest build",
+    "format": "prettier --write \"src/**/*.ts\" \"test/**/*.ts\"",
+    "start": "nest start",
+    "start:dev": "nest start --watch",
+    "start:debug": "nest start --debug --watch",
+    "start:prod": "node dist/main",
+    "lint": "eslint \"{src,apps,libs,test}/**/*.ts\" --fix",
+    "test": "jest",
+    "test:watch": "jest --watch",
+    "test:cov": "jest --coverage",
+    "test:debug": "node --inspect-brk -r tsconfig-paths/register -r ts-node/register node_modules/.bin/jest --runInBand",
+    "test:e2e": "jest --config ./test/jest-e2e.json"
+  },
+  "dependencies": {
+    "@nestjs/common": "^11.0.1",
+    "@nestjs/core": "^11.0.1",
+    "@nestjs/platform-express": "^11.0.1",
+    "@nestjs/platform-socket.io": "^11.1.19",
+    "@nestjs/websockets": "^11.1.19",
+    "reflect-metadata": "^0.2.2",
+    "rxjs": "^7.8.1"
+  },
+  "devDependencies": {
+    "@eslint/eslintrc": "^3.2.0",
+    "@eslint/js": "^9.18.0",
+    "@nestjs/cli": "^11.0.0",
+    "@nestjs/schematics": "^11.0.0",
+    "@nestjs/testing": "^11.0.1",
+    "@types/express": "^5.0.0",
+    "@types/jest": "^30.0.0",
+    "@types/node": "^24.0.0",
+    "@types/supertest": "^7.0.0",
+    "eslint": "^9.18.0",
+    "eslint-config-prettier": "^10.0.1",
+    "eslint-plugin-prettier": "^5.2.2",
+    "globals": "^17.0.0",
+    "jest": "^30.0.0",
+    "prettier": "^3.4.2",
+    "source-map-support": "^0.5.21",
+    "supertest": "^7.0.0",
+    "ts-jest": "^29.2.5",
+    "ts-loader": "^9.5.2",
+    "ts-node": "^10.9.2",
+    "tsconfig-paths": "^4.2.0",
+    "typescript": "^5.7.3",
+    "typescript-eslint": "^8.20.0"
+  },
+  "jest": {
+    "moduleFileExtensions": [
+      "js",
+      "json",
+      "ts"
+    ],
+    "rootDir": "src",
+    "testRegex": ".*\\.spec\\.ts$",
+    "transform": {
+      "^.+\\.(t|j)s$": "ts-jest"
+    },
+    "collectCoverageFrom": [
+      "**/*.(t|j)s"
+    ],
+    "coverageDirectory": "../coverage",
+    "testEnvironment": "node"
+  }
+}

core/src/app.module.ts

@@ -0,0 +1,10 @@
+import { Module } from '@nestjs/common';
+import { AppService } from './app.service';
+import { BackupModule } from './backup/backup.module';
+
+@Module({
+  imports: [BackupModule],
+  controllers: [],
+  providers: [AppService],
+})
+export class AppModule {}

core/src/app.service.ts

@@ -0,0 +1,8 @@
+import { Injectable } from '@nestjs/common';
+
+@Injectable()
+export class AppService {
+  getHello(): string {
+    return 'Hello World!';
+  }
+}

core/src/backup/backup.gateway.ts

@@ -0,0 +1,30 @@
+import {
+  MessageBody,
+  SubscribeMessage,
+  WebSocketGateway,
+  WebSocketServer,
+  WsResponse,
+} from '@nestjs/websockets';
+import { from, Observable } from 'rxjs';
+import { map } from 'rxjs/operators';
+import { Server } from 'socket.io';
+
+@WebSocketGateway({
+  cors: {
+    origin: '*',
+  },
+})
+export class BackupGateway {
+  @WebSocketServer()
+  server: Server;
+
+  @SubscribeMessage('events')
+  findAll(@MessageBody() data: any): Observable<WsResponse<number>> {
+    return from([1, 2, 3]).pipe(map(item => ({ event: 'events', data: item })));
+  }
+
+  @SubscribeMessage('identity')
+  async identity(@MessageBody() data: number): Promise<number> {
+    return data;
+  }
+}

core/src/backup/backup.module.ts

@@ -0,0 +1,9 @@
+import { Module } from '@nestjs/common';
+import { BackupGateway } from './backup.gateway';
+
+@Module({
+  imports: [],
+  controllers: [],
+  providers: [BackupGateway],
+})
+export class BackupModule {}

core/src/main.ts

@@ -0,0 +1,8 @@
+import { NestFactory } from '@nestjs/core';
+import { AppModule } from './app.module';
+
+async function bootstrap() {
+  const app = await NestFactory.create(AppModule);
+  await app.listen(process.env.PORT ?? 3000);
+}
+bootstrap();

core/tsconfig.build.json

@@ -0,0 +1,4 @@
+{
+  "extends": "./tsconfig.json",
+  "exclude": ["node_modules", "test", "dist", "**/*spec.ts"]
+}

core/tsconfig.json

@@ -0,0 +1,25 @@
+{
+  "compilerOptions": {
+    "module": "nodenext",
+    "moduleResolution": "nodenext",
+    "resolvePackageJsonExports": true,
+    "esModuleInterop": true,
+    "isolatedModules": true,
+    "declaration": true,
+    "removeComments": true,
+    "emitDecoratorMetadata": true,
+    "experimentalDecorators": true,
+    "allowSyntheticDefaultImports": true,
+    "target": "ES2023",
+    "sourceMap": true,
+    "outDir": "./dist",
+    "baseUrl": "./",
+    "incremental": true,
+    "skipLibCheck": true,
+    "strictNullChecks": true,
+    "forceConsistentCasingInFileNames": true,
+    "noImplicitAny": false,
+    "strictBindCallApply": false,
+    "noFallthroughCasesInSwitch": false
+  }
+}

docker-compose/all-down.sh

@@ -3,7 +3,7 @@
 SERVICE_NAMES=(
     # "paperless"
     # "immich"
-    # "navidrome"
+    "navidrome"
     "downloadin"
     # "matrix"
 )

docker-compose/all-pull.sh

@@ -3,7 +3,7 @@
 SERVICE_NAMES=(
     # "paperless"
     # "immich"
-    # "navidrome"
+    "navidrome"
     "downloadin"
     # "matrix"
 )

docker-compose/all-up.sh

@@ -3,7 +3,7 @@
 SERVICE_NAMES=(
     # "paperless"
     # "immich"
-    # "navidrome"
+    "navidrome"
     "downloadin"
     # "matrix"
 )

docker-compose/downloadin-compose.yaml

@@ -24,7 +24,7 @@ services:
       - 3333:3333         # bitmagnet API and WebUI port
       - 3334:3334/tcp     # bitmagnet BitTorrent ports
       - 3334:3334/udp     # bitmagnet BitTorrent ports
-      - 5055:5055         # seerr
+      # - 5055:5055         # seerr
       # - 8112:8112       # Deluge
       # - 6881:6881       # Deluge
       # - 6881:6881/udp   # Deluge
@@ -42,7 +42,6 @@ services:
     volumes:
       - ${DOWNLOAD_ETC_PATH}/transmission:/config
       - ${DOWNLOAD_IN_PROGRESS_PATH}:/downloads
-      - /mnt/mega/jellyfinMedia:/media
     restart: unless-stopped
 
   prowlarr:
@@ -72,8 +71,8 @@ services:
       - TZ=${TZ}
     volumes:
       - ${DOWNLOAD_ETC_PATH}/radarr:/config
-      - ${DOWNLOAD_IN_PROGRESS_PATH}:/downloads #optional
-      - /mnt/mega/jellyfinMedia:/media
+      - /mnt/tmpMedia/app_data/transmission/downloads/incomplete:/downloads/incomplete #optional
+      - /mnt/tmpMedia/app_data/jellyfin/media:/soupclown/localmedia
     depends_on:
       vpn:
         condition: service_started
@@ -95,8 +94,8 @@ services:
       - TZ=${TZ}
     volumes:
       - ${DOWNLOAD_ETC_PATH}/sonarr:/config
-      - ${DOWNLOAD_IN_PROGRESS_PATH}:/downloads #optional
-      - /mnt/mega/jellyfinMedia:/media
+      - /mnt/tmpMedia/app_data/jellyfin/media:/soupclown/localmedia
+      - /mnt/tmpMedia/app_data/transmission/downloads/incomplete:/downloads/incomplete #optional
     depends_on:
       vpn:
         condition: service_started
@@ -152,8 +151,9 @@ services:
     image: ghcr.io/seerr-team/seerr:latest
     init: true
     container_name: seerr
-    network_mode: "service:vpn"
     restart: unless-stopped
+    ports:
+      - 5055:5055
     environment:
       - TZ=${TZ}
       - LOG_LEVEL=debug

flake.lock

@@ -1,5 +1,23 @@
 {
   "nodes": {
+    "flake-parts": {
+      "inputs": {
+        "nixpkgs-lib": "nixpkgs-lib"
+      },
+      "locked": {
+        "lastModified": 1775087534,
+        "narHash": "sha256-91qqW8lhL7TLwgQWijoGBbiD4t7/q75KTi8NxjVmSmA=",
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "rev": "3107b77cd68437b9a76194f0f7f9c55f2329ca5b",
+        "type": "github"
+      },
+      "original": {
+        "owner": "hercules-ci",
+        "repo": "flake-parts",
+        "type": "github"
+      }
+    },
     "home-manager": {
       "inputs": {
         "nixpkgs": [
@@ -21,6 +39,21 @@
         "type": "github"
       }
     },
+    "import-tree": {
+      "locked": {
+        "lastModified": 1773693634,
+        "narHash": "sha256-BtZ2dtkBdSUnFPPFc+n0kcMbgaTxzFNPv2iaO326Ffg=",
+        "owner": "vic",
+        "repo": "import-tree",
+        "rev": "c41e7d58045f9057880b0d85e1152d6a4430dbf1",
+        "type": "github"
+      },
+      "original": {
+        "owner": "vic",
+        "repo": "import-tree",
+        "type": "github"
+      }
+    },
     "nixos-hardware": {
       "locked": {
         "lastModified": 1773533765,
@@ -53,9 +86,26 @@
         "type": "github"
       }
     },
+    "nixpkgs-lib": {
+      "locked": {
+        "lastModified": 1774748309,
+        "narHash": "sha256-+U7gF3qxzwD5TZuANzZPeJTZRHS29OFQgkQ2kiTJBIQ=",
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "rev": "333c4e0545a6da976206c74db8773a1645b5870a",
+        "type": "github"
+      },
+      "original": {
+        "owner": "nix-community",
+        "repo": "nixpkgs.lib",
+        "type": "github"
+      }
+    },
     "root": {
       "inputs": {
+        "flake-parts": "flake-parts",
         "home-manager": "home-manager",
+        "import-tree": "import-tree",
         "nixos-hardware": "nixos-hardware",
         "nixpkgs": "nixpkgs"
       }

flake.nix

@@ -4,6 +4,8 @@
   inputs = {
     nixpkgs.url = "github:NixOS/nixpkgs/nixos-25.11";
     nixos-hardware.url = "github:NixOS/nixos-hardware/master";
+    flake-parts.url = "github:hercules-ci/flake-parts";
+    import-tree.url = "github:vic/import-tree";
 
     home-manager = {
       url = "github:nix-community/home-manager/release-23.05";
@@ -11,31 +13,31 @@
     };
   };
 
-  outputs = { self, nixpkgs, home-manager, nixos-hardware, ... }@inputs: {
-    nixosConfigurations.qmoran-laptop = nixpkgs.lib.nixosSystem {
-      system = "x86_64-linux";
-      modules = [
-        ./nix/qlhc.nix
-        ./nix/common.nix
-        ./nix/user-quin.nix
-        ./nix/gui1.nix
-        ./nix/mega.nix
-        nixos-hardware.nixosModules.framework-11th-gen-intel
+  outputs = inputs@{ flake-parts, nixos-hardware, import-tree, nixpkgs, ... }:
+    flake-parts.lib.mkFlake { inherit inputs; } (top@{ config, withSystem, moduleWithSystem, ... }: {
+      flake = {
+        nixosConfigurations.qmoran-laptop = nixpkgs.lib.nixosSystem {
+          system = "x86_64-linux";
+          modules = [
+            (import-tree ./modules)
+            nixos-hardware.nixosModules.framework-11th-gen-intel
+            ./nix/qlhc.nix
+          ];
+        };
+        nixosConfigurations.qmoran-desktop = nixpkgs.lib.nixosSystem {
+          system = "x86_64-linux";
+          modules = [
+            (import-tree ./modules)
+            ./nix/qdhc.nix
+            ./nix/jf-server.nix
+          ];
+        };
+      };
+      systems = [
+        "x86_64-linux"
       ];
-    };
-
-    nixosConfigurations.qmoran-desktop = nixpkgs.lib.nixosSystem {
-      system = "x86_64-linux";
-      modules = [
-        ./nix/qdhc.nix
-        ./nix/common.nix
-        ./nix/user-quin.nix
-        ./nix/gui1.nix
-        ./nix/mega.nix
-        ./nix/jf-server.nix
-      ];
-    };
-
-  };
+    });
 }
 
+
+    

modules/common.nix

@@ -18,6 +18,10 @@
     "flakes" 
   ];
 
+  nixpkgs.config.permittedInsecurePackages = [
+    "python3.12-ecdsa-0.19.1" # I'm sure this is fine (just don't use python for anything important like usual)
+  ];
+
   i18n.extraLocaleSettings = {
     LC_ADDRESS = "en_US.UTF-8";
     LC_IDENTIFICATION = "en_US.UTF-8";
@@ -33,5 +37,6 @@
   environment.systemPackages = with pkgs; [
     git
     tailscale
+    rclone
   ];
 }

modules/user-quin.nix

@@ -28,6 +28,13 @@
       gimp
       kicad-small
       rpi-imager
+      vscodium-fhs
+      ansible_2_18
+      usbutils
+      python313Packages.nomadnet
+      screen
+      jellyfin-desktop
+      renpy
     ];
   };
 

nix/README.md

@@ -1,13 +0,0 @@
-# It's NixOS!
-
-Hello MtV and welcome to my crib. These are all the things pertaining to my nixos stuff.
-
-- [./common.nix](./common.nix) is all the common things that hosts will have configured
-  - Services
-  - locale settings
-  - timezone
-- [./gui1](./gui1.nix) all config things for a linux UX experience, KDE Plasma in this instance, but perhaps there could be a gui2 someday...
-- [./qlhc.nix](./qlhc.nix) this stands for quins-laptop-hardware-configuraion. I'll find a better way to do this stuff later.
-- [./user-quin](./user-quin.nix) my personal user account, here for all to see.
-  - packages
-  - groups

nix/qdhc.nix

@@ -30,6 +30,13 @@
       options = [ "fmask=0077" "dmask=0077" ];
     };
 
+  fileSystems."/mnt/tmpMedia" =
+    { 
+      device = "/dev/disk/by-uuid/fa20e116-e04e-4f3e-bf5a-c2e2c1fad610";
+      fsType = "ext4";
+      options = ["noatime" "nodiratime" "noauto"];
+    };
+
   swapDevices =
     [ { device = "/dev/disk/by-uuid/cf4cff49-15d7-4145-86c2-8be30e71fe4c"; }
     ];

python/.gitignore

@@ -0,0 +1,6 @@
+#renpy assets for localdev
+cache/
+saves/
+log.txt
+traceback.txt
+

python/renpypg1/.gitignore

@@ -0,0 +1,26 @@
+# Directories that Ren'Py changes files in.
+/game/saves
+/game/cache
+
+# Compiled script files. These are important for saving, and so should
+# be preserved by developer and build systems after the game has been released.
+/game/**/*.rpyc
+/game/**/*.rpymc
+
+# Files Ren'Py can generate.
+/game/**/*.bak
+/game/**/*.new
+/game/**/*.old
+
+# Error, log, and output files.
+/errors.txt
+/files.txt
+/image_cache.txt
+/log.txt
+/save_dump.txt
+/traceback.txt
+
+# Launcher-generated files.
+/dialogue.tab
+/dialogue.txt
+/strings.json

python/renpypg1/game/gui.rpy

@@ -0,0 +1,480 @@
+################################################################################
+## Initialization
+################################################################################
+
+## The init offset statement causes the initialization statements in this file
+## to run before init statements in any other file.
+init offset = -2
+
+## Calling gui.init resets the styles to sensible default values, and sets the
+## width and height of the game.
+init python:
+    gui.init(1920, 1080)
+
+## Enable checks for invalid or unstable properties in screens or transforms
+define config.check_conflicting_properties = True
+
+
+################################################################################
+## GUI Configuration Variables
+################################################################################
+
+
+## Colors ######################################################################
+##
+## The colors of text in the interface.
+
+## An accent color used throughout the interface to label and highlight text.
+define gui.accent_color = '#cc6600'
+
+## The color used for a text button when it is neither selected nor hovered.
+define gui.idle_color = '#888888'
+
+## The small color is used for small text, which needs to be brighter/darker to
+## achieve the same effect.
+define gui.idle_small_color = '#aaaaaa'
+
+## The color that is used for buttons and bars that are hovered.
+define gui.hover_color = '#e0a366'
+
+## The color used for a text button when it is selected but not focused. A
+## button is selected if it is the current screen or preference value.
+define gui.selected_color = '#ffffff'
+
+## The color used for a text button when it cannot be selected.
+define gui.insensitive_color = '#8888887f'
+
+## Colors used for the portions of bars that are not filled in. These are not
+## used directly, but are used when re-generating bar image files.
+define gui.muted_color = '#512800'
+define gui.hover_muted_color = '#7a3d00'
+
+## The colors used for dialogue and menu choice text.
+define gui.text_color = '#ffffff'
+define gui.interface_text_color = '#ffffff'
+
+
+## Fonts and Font Sizes ########################################################
+
+## The font used for in-game text.
+define gui.text_font = "DejaVuSans.ttf"
+
+## The font used for character names.
+define gui.name_text_font = "DejaVuSans.ttf"
+
+## The font used for out-of-game text.
+define gui.interface_text_font = "DejaVuSans.ttf"
+
+## The size of normal dialogue text.
+define gui.text_size = 33
+
+## The size of character names.
+define gui.name_text_size = 45
+
+## The size of text in the game's user interface.
+define gui.interface_text_size = 33
+
+## The size of labels in the game's user interface.
+define gui.label_text_size = 36
+
+## The size of text on the notify screen.
+define gui.notify_text_size = 24
+
+## The size of the game's title.
+define gui.title_text_size = 75
+
+
+## Main and Game Menus #########################################################
+
+## The images used for the main and game menus.
+define gui.main_menu_background = "gui/main_menu.png"
+define gui.game_menu_background = "gui/game_menu.png"
+
+
+## Dialogue ####################################################################
+##
+## These variables control how dialogue is displayed on the screen one line at
+## a time.
+
+## The height of the textbox containing dialogue.
+define gui.textbox_height = 278
+
+## The placement of the textbox vertically on the screen. 0.0 is the top, 0.5
+## is center, and 1.0 is the bottom.
+define gui.textbox_yalign = 1.0
+
+
+## The placement of the speaking character's name, relative to the textbox.
+## These can be a whole number of pixels from the left or top, or 0.5 to center.
+define gui.name_xpos = 360
+define gui.name_ypos = 0
+
+## The horizontal alignment of the character's name. This can be 0.0 for left-
+## aligned, 0.5 for centered, and 1.0 for right-aligned.
+define gui.name_xalign = 0.0
+
+## The width, height, and borders of the box containing the character's name,
+## or None to automatically size it.
+define gui.namebox_width = None
+define gui.namebox_height = None
+
+## The borders of the box containing the character's name, in left, top, right,
+## bottom order.
+define gui.namebox_borders = Borders(5, 5, 5, 5)
+
+## If True, the background of the namebox will be tiled, if False, the
+## background of the namebox will be scaled.
+define gui.namebox_tile = False
+
+
+## The placement of dialogue relative to the textbox. These can be a whole
+## number of pixels relative to the left or top side of the textbox, or 0.5 to
+## center.
+define gui.dialogue_xpos = 402
+define gui.dialogue_ypos = 75
+
+## The maximum width of dialogue text, in pixels.
+define gui.dialogue_width = 1116
+
+## The horizontal alignment of the dialogue text. This can be 0.0 for left-
+## aligned, 0.5 for centered, and 1.0 for right-aligned.
+define gui.dialogue_text_xalign = 0.0
+
+
+## Buttons #####################################################################
+##
+## These variables, along with the image files in gui/button, control aspects
+## of how buttons are displayed.
+
+## The width and height of a button, in pixels. If None, Ren'Py computes a size.
+define gui.button_width = None
+define gui.button_height = None
+
+## The borders on each side of the button, in left, top, right, bottom order.
+define gui.button_borders = Borders(6, 6, 6, 6)
+
+## If True, the background image will be tiled. If False, the background image
+## will be linearly scaled.
+define gui.button_tile = False
+
+## The font used by the button.
+define gui.button_text_font = gui.interface_text_font
+
+## The size of the text used by the button.
+define gui.button_text_size = gui.interface_text_size
+
+## The color of button text in various states.
+define gui.button_text_idle_color = gui.idle_color
+define gui.button_text_hover_color = gui.hover_color
+define gui.button_text_selected_color = gui.selected_color
+define gui.button_text_insensitive_color = gui.insensitive_color
+
+## The horizontal alignment of the button text. (0.0 is left, 0.5 is center,
+## 1.0 is right).
+define gui.button_text_xalign = 0.0
+
+
+## These variables override settings for different kinds of buttons. Please see
+## the gui documentation for the kinds of buttons available, and what each is
+## used for.
+##
+## These customizations are used by the default interface:
+
+define gui.radio_button_borders = Borders(27, 6, 6, 6)
+
+define gui.check_button_borders = Borders(27, 6, 6, 6)
+
+define gui.confirm_button_text_xalign = 0.5
+
+define gui.page_button_borders = Borders(15, 6, 15, 6)
+
+define gui.quick_button_borders = Borders(15, 6, 15, 0)
+define gui.quick_button_text_size = 21
+define gui.quick_button_text_idle_color = gui.idle_small_color
+define gui.quick_button_text_selected_color = gui.accent_color
+
+## You can also add your own customizations, by adding properly-named
+## variables. For example, you can uncomment the following line to set the width
+## of a navigation button.
+
+# define gui.navigation_button_width = 250
+
+
+## Choice Buttons ##############################################################
+##
+## Choice buttons are used in the in-game menus.
+
+define gui.choice_button_width = 1185
+define gui.choice_button_height = None
+define gui.choice_button_tile = False
+define gui.choice_button_borders = Borders(150, 8, 150, 8)
+define gui.choice_button_text_font = gui.text_font
+define gui.choice_button_text_size = gui.text_size
+define gui.choice_button_text_xalign = 0.5
+define gui.choice_button_text_idle_color = '#888888'
+define gui.choice_button_text_hover_color = "#ffffff"
+define gui.choice_button_text_insensitive_color = '#8888887f'
+
+
+## File Slot Buttons ###########################################################
+##
+## A file slot button is a special kind of button. It contains a thumbnail
+## image, and text describing the contents of the save slot. A save slot uses
+## image files in gui/button, like the other kinds of buttons.
+
+## The save slot button.
+define gui.slot_button_width = 414
+define gui.slot_button_height = 309
+define gui.slot_button_borders = Borders(15, 15, 15, 15)
+define gui.slot_button_text_size = 21
+define gui.slot_button_text_xalign = 0.5
+define gui.slot_button_text_idle_color = gui.idle_small_color
+define gui.slot_button_text_selected_idle_color = gui.selected_color
+define gui.slot_button_text_selected_hover_color = gui.hover_color
+
+## The width and height of thumbnails used by the save slots.
+define config.thumbnail_width = 384
+define config.thumbnail_height = 216
+
+## The number of columns and rows in the grid of save slots.
+define gui.file_slot_cols = 3
+define gui.file_slot_rows = 2
+
+
+## Positioning and Spacing #####################################################
+##
+## These variables control the positioning and spacing of various user
+## interface elements.
+
+## The position of the left side of the navigation buttons, relative to the
+## left side of the screen.
+define gui.navigation_xpos = 60
+
+## The vertical position of the skip indicator.
+define gui.skip_ypos = 15
+
+## The vertical position of the notify screen.
+define gui.notify_ypos = 68
+
+## The spacing between menu choices.
+define gui.choice_spacing = 33
+
+## Buttons in the navigation section of the main and game menus.
+define gui.navigation_spacing = 6
+
+## Controls the amount of spacing between preferences.
+define gui.pref_spacing = 15
+
+## Controls the amount of spacing between preference buttons.
+define gui.pref_button_spacing = 0
+
+## The spacing between file page buttons.
+define gui.page_spacing = 0
+
+## The spacing between file slots.
+define gui.slot_spacing = 15
+
+## The position of the main menu text.
+define gui.main_menu_text_xalign = 1.0
+
+
+## Frames ######################################################################
+##
+## These variables control the look of frames that can contain user interface
+## components when an overlay or window is not present.
+
+## Generic frames.
+define gui.frame_borders = Borders(6, 6, 6, 6)
+
+## The frame that is used as part of the confirm screen.
+define gui.confirm_frame_borders = Borders(60, 60, 60, 60)
+
+## The frame that is used as part of the skip screen.
+define gui.skip_frame_borders = Borders(24, 8, 75, 8)
+
+## The frame that is used as part of the notify screen.
+define gui.notify_frame_borders = Borders(24, 8, 60, 8)
+
+## Should frame backgrounds be tiled?
+define gui.frame_tile = False
+
+
+## Bars, Scrollbars, and Sliders ###############################################
+##
+## These control the look and size of bars, scrollbars, and sliders.
+##
+## The default GUI only uses sliders and vertical scrollbars. All of the other
+## bars are only used in creator-written screens.
+
+## The height of horizontal bars, scrollbars, and sliders. The width of
+## vertical bars, scrollbars, and sliders.
+define gui.bar_size = 38
+define gui.scrollbar_size = 18
+define gui.slider_size = 38
+
+## True if bar images should be tiled. False if they should be linearly scaled.
+define gui.bar_tile = False
+define gui.scrollbar_tile = False
+define gui.slider_tile = False
+
+## Horizontal borders.
+define gui.bar_borders = Borders(6, 6, 6, 6)
+define gui.scrollbar_borders = Borders(6, 6, 6, 6)
+define gui.slider_borders = Borders(6, 6, 6, 6)
+
+## Vertical borders.
+define gui.vbar_borders = Borders(6, 6, 6, 6)
+define gui.vscrollbar_borders = Borders(6, 6, 6, 6)
+define gui.vslider_borders = Borders(6, 6, 6, 6)
+
+## What to do with unscrollable scrollbars in the game menu. "hide" hides them,
+## while None shows them.
+define gui.unscrollable = "hide"
+
+
+## History #####################################################################
+##
+## The history screen displays dialogue that the player has already dismissed.
+
+## The number of blocks of dialogue history Ren'Py will keep.
+define config.history_length = 250
+
+## The height of a history screen entry, or None to make the height variable at
+## the cost of performance.
+define gui.history_height = 210
+
+## Additional space to add between history screen entries.
+define gui.history_spacing = 0
+
+## The position, width, and alignment of the label giving the name of the
+## speaking character.
+define gui.history_name_xpos = 233
+define gui.history_name_ypos = 0
+define gui.history_name_width = 233
+define gui.history_name_xalign = 1.0
+
+## The position, width, and alignment of the dialogue text.
+define gui.history_text_xpos = 255
+define gui.history_text_ypos = 3
+define gui.history_text_width = 1110
+define gui.history_text_xalign = 0.0
+
+
+## NVL-Mode ####################################################################
+##
+## The NVL-mode screen displays the dialogue spoken by NVL-mode characters.
+
+## The borders of the background of the NVL-mode background window.
+define gui.nvl_borders = Borders(0, 15, 0, 30)
+
+## The maximum number of NVL-mode entries Ren'Py will display. When more
+## entries than this are to be show, the oldest entry will be removed.
+define gui.nvl_list_length = 6
+
+## The height of an NVL-mode entry. Set this to None to have the entries
+## dynamically adjust height.
+define gui.nvl_height = 173
+
+## The spacing between NVL-mode entries when gui.nvl_height is None, and
+## between NVL-mode entries and an NVL-mode menu.
+define gui.nvl_spacing = 15
+
+## The position, width, and alignment of the label giving the name of the
+## speaking character.
+define gui.nvl_name_xpos = 645
+define gui.nvl_name_ypos = 0
+define gui.nvl_name_width = 225
+define gui.nvl_name_xalign = 1.0
+
+## The position, width, and alignment of the dialogue text.
+define gui.nvl_text_xpos = 675
+define gui.nvl_text_ypos = 12
+define gui.nvl_text_width = 885
+define gui.nvl_text_xalign = 0.0
+
+## The position, width, and alignment of nvl_thought text (the text said by the
+## nvl_narrator character.)
+define gui.nvl_thought_xpos = 360
+define gui.nvl_thought_ypos = 0
+define gui.nvl_thought_width = 1170
+define gui.nvl_thought_xalign = 0.0
+
+## The position of nvl menu_buttons.
+define gui.nvl_button_xpos = 675
+define gui.nvl_button_xalign = 0.0
+
+
+## Localization ################################################################
+
+## This controls where a line break is permitted. The default is suitable
+## for most languages. A list of available values can be found at https://
+## www.renpy.org/doc/html/style_properties.html#style-property-language
+
+define gui.language = "unicode"
+
+
+################################################################################
+## Mobile devices
+################################################################################
+
+init python:
+
+    ## This increases the size of the quick buttons to make them easier to
+    ## touch on tablets and phones.
+    @gui.variant
+    def touch():
+
+        gui.quick_button_borders = Borders(60, 21, 60, 0)
+
+    ## This changes the size and spacing of various GUI elements to ensure they
+    ## are easily visible on phones.
+    @gui.variant
+    def small():
+
+        ## Font sizes.
+        gui.text_size = 45
+        gui.name_text_size = 54
+        gui.notify_text_size = 38
+        gui.interface_text_size = 45
+        gui.button_text_size = 45
+        gui.label_text_size = 51
+
+        ## Adjust the location of the textbox.
+        gui.textbox_height = 360
+        gui.name_xpos = 120
+        gui.dialogue_xpos = 135
+        gui.dialogue_width = 1650
+
+        ## Change the size and spacing of various things.
+        gui.slider_size = 54
+
+        gui.choice_button_width = 1860
+        gui.choice_button_text_size = 45
+
+        gui.navigation_spacing = 30
+        gui.pref_button_spacing = 15
+
+        gui.history_height = 285
+        gui.history_text_width = 1035
+
+        gui.quick_button_text_size = 30
+
+        ## File button layout.
+        gui.file_slot_cols = 2
+        gui.file_slot_rows = 2
+
+        ## NVL-mode.
+        gui.nvl_height = 255
+
+        gui.nvl_name_width = 458
+        gui.nvl_name_xpos = 488
+
+        gui.nvl_text_width = 1373
+        gui.nvl_text_xpos = 518
+        gui.nvl_text_ypos = 8
+
+        gui.nvl_thought_width = 1860
+        gui.nvl_thought_xpos = 30
+
+        gui.nvl_button_width = 1860
+        gui.nvl_button_xpos = 30